Oil-free Nitrogen Compressors_Oil-free nitrogen compressor_Nitrogen compressor_Product

Product

Oxygen compressor

- Completely oil-free medium low pressure oxygen compressor

- Oil-free oxygen compressor

- Circulating oxygen booster machine

- Tank type oil-free oxygen compressor
Nitrogen compressor

- Full oil-free nitrogen compressor

- Oil-free nitrogen compressor

- Tank type oil-free nitrogen compressor
High pressure oil-free gas filling machine

- Full oil-free high-pressure oxygen compressor

- Full oil-free high-pressure nitrogen compressor
Hydrogen compressor

- All oil-free hydrogen compressor

- Oil-free hydrogen compressor
Carbon dioxide compressor

- Fully oil-free CO2 recovery compressor
Sulfur hexafluoride compressor

- Completely oil-free SF6 compressor
Oil-free compressor for laser cutting

- Completely oil-free helium compressor

- Oil-free helium compressor
Water lubricated oil-free screw air compressor

- Completely oil-free biogas compressor
Air compressor

- All oil-free air compressor

- Air compressor

- Laser cutting machine
Natural gas compressor

- All oil-free natural gas compressors
Oil-gas compressor

- Intelligent oil associated gas recovery compressor
Screw machine

- Screw air compressor

- Water lubricated screw air compressor
Explosion-proof compressor

Oil-free nitrogen compressor

Oil-free Nitrogen Compressors

Oil-free design, guide ring, piston ring, piston rod packing are made of self-lubricating material, oil-free lubrication. Bearing and axial tile parts using ordinary lubricating oil, intermittent design so that the lubricating oil and the gas cavity is effectively isolated from the compressed medium contact, to avoid the compression process of gas pollution, to ensure the purity of the gas. According to the actual gas situation, the compressor is divided into single-stage or multi-stage compression; the structure form is divided into single-cylinder, double-cylinder, triple-cylinder, quadruple-cylinder and combined multi-cylinder structure; the cooling method is divided into air-cooled and water-cooled.

Product details

Oil-free design, guide ring, piston ring, piston rod packing are made of self-lubricating material, oil-free lubrication. Bearing and axial tile parts using ordinary lubricating oil, intermittent design so that the lubricating oil and the gas cavity is effectively isolated from the compressed medium contact, to avoid the compression process of gas pollution, to ensure the purity of the gas. According to the actual gas situation, the compressor is divided into single-stage or multi-stage compression; structural form is divided into single-cylinder, double-cylinder, triple-cylinder, quadruple-cylinder and combined multi-cylinder structure; cooling mode is divided into air-cooled and water-cooled.

This series of compressor nitrogen flow demand is relatively large, the exhaust pressure is higher nitrogen booster occasions, applicable to the process of boosting, stabilizing pressure, power and blowing.

Suction pressure: 0~ 1Mpa (G), discharge pressure: ≤20 Mpa (G)

The oil-free nitrogen compressor technical specification sheet is issued by the outsourcing manufacturer and the profile is optimized by the outsourcing manufacturer.

The above parameters are for reference only, subject to the actual technical program. Models with larger flow rate and more inlet and exhaust pressures can be configured according to the specific requirements of users, please consult us further.